Marathon Powder 40g / swix
En savoir plus
Powder version of the well-known Marathon glide wax. Much easier to apply than hard was as it melts faster and is easier to scrape off. The abrasion resistance of the product is the same. The grain size of the powder has been thoroughly tested to achieve the best application result and performance for the product.
Apply a good layer of powder onto the base, then run the iron over twice to ensure the powder melts completely. The temperature of the waxing iron should be 160 degrees, and it should take 5 to 7 seconds to go over the entire length of the ski with the iron. After cooling, scrape off the product using a plexi scraper and then brush with a steel or bronze brush, and finally polish using the blue nylon brush.
Apply a good layer of powder onto the base, then run the iron over twice to ensure the powder melts completely. The temperature of the waxing iron should be 160 degrees, and it should take 5 to 7 seconds to go over the entire length of the ski with the iron. After cooling, scrape off the product using a plexi scraper and then brush with a steel or bronze brush, and finally polish using the blue nylon brush.